Need help?Do you have a question about the Phoenix Contact AXC F 1152 and is the answer not in the manual?
General| Brand | Phoenix Contact |
|---|---|
| Model | AXC F 1152 |
| Category | Controller |
| Language | English |
Explains symbols and signal words used for hazards and warnings.
Specifies the target audience and their required knowledge for using the product.
Describes the intended use and environment for the controllers.
General safety precautions regarding environment, ESD, and foreign objects.
Discusses risks of unauthorized network access and protective measures.
Guidelines for using the AXC F 2152 in ATEX/IECEx zones.
Instructions for transporting the device in its original packaging.
Requirements for the storage location to ensure device integrity.
Steps for unpacking the controller and safety notes.
Overview of the controllers' modular design, stations, and programming.
Details on open-source licenses and software used in the controllers.
Information on accessing and navigating the controller's file system.
Guide to accessing the controller's file system using SFTP.
Information about the controller's firewall and recommended activation.
Explains how to use the controller as a PROFINET controller.
Explains how to use the controller as a PROFINET device.
Identifies and describes the physical connection and operating elements.
Details the information printed on the controller's label.
Explains the meaning of various LEDs for diagnostics.
Describes the function of the mode selector switch on the AXC F 3152.
Details the function and types of resets for the controller.
Information on internal memory and its usage.
Details on using an SD card for parameterization and data storage.
Provides a schematic of the controller's internal circuitry.
Outlines the available communication interfaces (Ethernet, service).
Details the terminal points for connecting the supply voltage.
Explains the function and types of bus base modules.
Safety precautions for mounting, ESD, and contacts.
General information on mounting location, DIN rail, and connectors.
Explains how to assemble an Axioline F station with modules.
Describes setting up a PLCnext Inline station using an adapter terminal.
Step-by-step instructions for mounting the controller and bus base modules.
Instructions for inserting the SD card into the controller.
Guidelines for selecting a suitable power supply unit for the controller.
Detailed steps for connecting the power supply using ferrules or conductors.
Instructions for connecting the controller to the Ethernet network.
Steps to download and install the PLCnext Engineer software.
Overview of the PLCnext Engineer user interface layout and components.
Steps for creating a new project using a template in PLCnext Engineer.
How to configure the IP address range and subnet mask for the project.
Manual or automatic configuration of the controller's IP address.
Steps to connect PLCnext Engineer to the controller online.
Introduction to system variables for diagnostics and controller control.
Explains system variables organized as data structures.
System variable for retrieving various device status information.
Lists PROFINET system variables for controller functionality.
Safety precautions for removing hardware components.
Instructions for disconnecting and removing cables from connectors.
Steps to remove supply and Ethernet connectors.
Instructions for safely removing the SD card from the controller.
Procedure for removing the controller from the DIN rail.
Steps for replacing a controller and adopting settings.
Information on sending defective devices for repair or replacement.
States that the controller is maintenance-free.
Guidelines for responsible disposal of the controller and packaging.
Points to the PLCnext Community for troubleshooting and FAQs.
Lists product descriptions, types, order numbers, and package quantities.
Lists related user manuals, data sheets, and application notes.
Detailed technical specifications for AXC F 1152 and AXC F 2152.
Detailed technical specifications for the AXC F 3152.
Instructions for updating controller firmware using a shell.
Lists shell commands for firmware control (start, stop, restart).
Procedure for replacing the controller's HTTPS certificate files.
Details on testing and conditions for using the AXC F 2152 in extreme environments.
An index of all figures present in the document.
An index of all tables present in the document.
To Next Page
