Phoenix Contact AXC F 3152 User Manual

Startup
107708_en_08 PHOENIX CONTACT 55 / 112
6Startup
The PLCnext Engineer software is required for starting up the controllers.
6.1 Installing PLCnext Engineer
The software can be downloaded at phoenixcontact.net/product/1046008.
• Download the software onto your PC.
• Double-click the *.exe file to start installation.
• Follow the instructions in the installation wizard.
Make sure you install a version of the PLCnext Engineer software that is suitable for your
controller:
In addition, the following topics are available in the PLCnext Technology Info Center
:
– Configuring Axioline F modules
– Configuring Inline modules
– Adding left-alignable Axioline F extension modules to the bus configuration
– Configuring PROFINET devices
– Programming according to IEC 61131-3
– Instantiating of programs
– Assigning process data
– Specifying the refresh interval for Axioline F I/O data
– Transferring a project to the controller
– Creating a PLCnext Engineer HMI application
Controller PLCnext Engineer version
AXC F 1152 ≥2020.0
AXC F 2152 ≥2020.0
AXC F 3152 ≥2020.3

Phoenix Contact AXC F 3152 Specifications

General

Brand	Phoenix Contact
Model	AXC F 3152
Category	Controller
Language	English