Phoenix Contact AXC F 3152 User Manual

AXC F X152
18 / 112
PHOENIX CONTACT 107708_en_08
3.5 Using SFTP to access the file system
The file system (on the internal parameterization memory and on the SD card of the control-
ler) is accessed via the SFTP protocol. An SFTP client software is required for this (e.g.,
WinSCP).
Access to the file system via SFTP requires authentication with a user name and password.
In the delivery state, the following access data with administrator rights is preset:
User name: admin
Password: printed on the controller (see Figure 3-2).
Figure 3-2 Administrator password on the controller
Please note:
Authentication with a user name and password is always required for SFTP access and
cannot be deactivated.
Only users with administrator rights can access the file system.
You can create additional users with administrator rights in the web-based management
system of the controller. For additional information, please refer to the
PLCnext Technology Info Center.
AXC F 1152 and AXC F 2152 AXC F 3152
SD-CARD
R
X4
MAC Addr.: 00.A0.45.9D13.BC
Ord. No. 2404267
AXC F 2152
X1
X2
UL
a1 b1
b2b1
scan here
for easy start up
BF-C
BF-C
SF
BOOT
EXT
FAIL
RUN
DBG
D
E
PLCnext Technology
Designed by PHOENIX CONTACT
password: 12345678
www.plcnext-community.net
ULUL
a1 b1
b2b1b1
X2
BF-C
BF-C
SF
BOOT
EXT
FA I L
RUN
DBG
D
E
X1
X3
SD-CARD
RUN/PROG
X4
R
STOP
MRESET
password: 12345678
plcnextcommunity.com
PLCnext Control
Ord.-No 1069208
AXC F 3152

Phoenix Contact AXC F 3152 Specifications

General

Brand	Phoenix Contact
Model	AXC F 3152
Category	Controller
Language	English