Need help?Do you have a question about the Phoenix Contact AXC F 1050 and is the answer not in the manual?
General| Clock Frequency | 1.75 GHz |
|---|---|
| Flash Memory | 4 GB |
| Ethernet Ports | 2 |
| Power Supply | 24 V DC |
| Weight | 500 g |
| Degree of protection | IP20 |
| Vibration resistance according to IEC 60068-2-6 | 5 g |
| Shock according to IEC 60068-2-27 | 15 g |
| Operating system | Linux |
| Number of PLC cores | 2 |
| Primary power supply | 24 V DC |
| Number of local INTERBUS modules | 0 |
| Installation altitude | up to 2000 m |
| Type | Controller |
| RAM | 2 GB |
| Operating Temperature | -20 °C to +60 °C |
| Ambient temperature (operation) | -20 °C to +60 °C |
| Ambient temperature (storage/transport) | -40 °C to +85 °C |
| Permissible humidity (operation) | 5 to 95 % |
| Supply voltage range | 19.2 V to 28.8 V DC |
| Typical current consumption | 250 mA (at 24 V DC) |
| Number of local PROFINET RT devices | 0 |
| Number of local Modbus/TCP devices | 0 |
| Number of local OPC UA devices | 0 |
| Number of local raw/socket devices | 0 |
General safety guidelines and rules for installation and maintenance.
Specific safety instructions for ATEX zones.
Explains LEDs and diagnostic indicators for troubleshooting.
Safety precautions related to mounting and handling electronic components.
Step-by-step guide for securely mounting the controller.
Safety precautions for electrical connections and wiring.
Guidelines for selecting and connecting the power supply.
Steps for software installation and license activation.
Creating projects and setting IP addresses for the controller.
Establishing connection and configuring PROFINET/Axioline F modules.
Creating POUs, variables, programs, functions, and function blocks.
Steps to compile, transfer, and execute the project on the controller.
Managing passwords, factory defaults, and firmware updates via WBM.
To Next Page