Phoenix Contact AXC F 1050 User Manual

AXC F 1050
52 / 140
PHOENIX CONTACT 107709_en_00
6.5 Configuring the IP settings
6.5.1 Setting the IP address range
• Double-click on the “Project (x)” node in the “PLANT” area.
The “Project” editor group opens.
• Select the “Settings” editor.
• Set the desired IP address range and the subnet mask for the project.
Figure 6-3 Setting the IP address range

Phoenix Contact AXC F 1050 Specifications

General

Brand	Phoenix Contact
Model	AXC F 1050
Category	Controller
Language	English