Phoenix Contact AXC F 1050 User Manual

AXC F 1050
88 / 140
PHOENIX CONTACT 107709_en_00
7.6 Activating or deactivating the MRP client function
The controller supports the Media Redundancy Protocol (MRP) and can be used as an
MRP client.
In the “MRP” view, you can switch the MRP client function on, off, or read the controller's
current setting.
• Select the “MRP” view.
Figure 7-9 “Online Parameters” editor, “MRP” view
Activating or deactivating
the MRP client function
• To switch the MRP client function on, select “Activated” in the “MRP function“ drop-
down list.
• To switch the MRP client function off, select “Deactivated” in the “MRP function“ drop-
down list (default setting).
Transferring the setting to
the controller
• Click on the button to send the setting to the controller (“Write values to the de-
vice”).
The setting will not take effect until the controller has been rebooted.
• To reboot the controller, click on the button (“Reboot the controller (Ctrl+Alt+F6)”).
Reading settings • Click on the button to read the controller's settings (“Read values from the device”).
Contact Phoenix Contact if you would like to use this function.

Phoenix Contact AXC F 1050 Specifications

General

Brand	Phoenix Contact
Model	AXC F 1050
Category	Controller
Language	English