Phoenix Contact AXC F 1050 User Manual

AXC F 1050
92 / 140
PHOENIX CONTACT 107709_en_00
7.9 Activating or deactivating the SNTP client function
You can synchronize the time and date information for the controller's real-time clock to an
SNTP server.
In the “SNTP client” view, you can switch the SNTP client function on or off, enter an update
cycle for the synchronization and the SNTP server's IP address, or read the controller's cur-
rent setting.
• Select the “SNTP client” view.
Figure 7-12 “Online Parameters” editor, “SNTP client” view
Activating or deactivating
the SNTP client function
• To switch the SNTP client function on, select “Activated” in the “SNTP client status“
drop-down list.
• To switch the SNTP client function off, select “Deactivated” in the “SNTP client status“
drop-down list (default setting).
If you set the real-time clock time and date information manually earlier (see Section 7.3)
and are now activating the SNTP client function, the previous time and date information
will be overwritten.

Phoenix Contact AXC F 1050 Specifications

General

Brand	Phoenix Contact
Model	AXC F 1050
Category	Controller
Language	English