AXC F 1050
14 / 140
PHOENIX CONTACT 107709_en_00
– Only use plastic bubble wrap sheets as filler material.
– Attach warnings to the transport packaging so that they are clearly visible.
– Please ensure that the delivery note is placed inside the package in the case of
packages that are to remain within the same country. However, if the package is
being sent to other countries, the delivery note must be placed inside a delivery
note pocket and attached to the outside so that it is clearly visible.
Scope of supply – AXC F 1050 controller
– AXL BS BK bus base module
– AXL CN S/UL supply plug
2.4 Unpacking
The AXC F 1050 is supplied in the packaging together with a packing slip with installation
instructions.
• Read the complete packing slip carefully before unpacking the controller.
NOTE: Electrostatic discharge!
The device contains components that can be damaged or destroyed by electrostatic dis-
charge. When handling the device, observe the necessary safety precautions against
electrostatic discharge (ESD) in accordance with EN 61340-5-1 and IEC 61340-5-1.
NOTE: Property damage due to noncompliance with ESD notes
If the ESD notes are not observed during unpacking and packaging, the device may be-
come damaged.
• Observe the ESD notes during unpacking and packaging.
To Next Page
Loading...
Need help?
General
