Phoenix Contact AXC F 3152 - B 2 List of Tables

List of tables
107708_en_08 PHOENIX CONTACT 107 / 112
B 2 List of tables
Section 1
Table 1-1: Temperature derating of the AXC F 2152 depending on the alti-
tude ..................................................................................................... 11
Section 3
Table 3-1: Controller diagnostic and status indicators ..........................................26
Table 3-2: Controller operating modes ................................................................. 30
Table 3-3: Terminal point assignment of the supply connector.............................39
Section 4
Table 4-1: Recommended end brackets............................................................... 43
Section 8
Table 8-1: RTC system variable (RTC_TYPE data structure) and the sys-
tem variables it contains ......................................................................67
Table 8-2: Power supply system variables............................................................ 67
Table 8-3: System variables for the TCP_SOCKET, UDP_SOCKET, and
TLS_SOCKET function blocks ............................................................ 67
Table 8-4: DEVICE_STATE system variable (DEVICE_STATE_X152_TYPE
data structure) and the system variables it contains ............................ 68
Tabelle 8-5: USER_PARTITION system variable (PARTITION_INFO data
structure) and the system variables it contains ....................................69
Table 8-6: ESM_DATA system variable (ESM_DAT data structure) and the
system variables it contains................................................................. 70
Table 8-7: HMI_STATUS system variable (HMI_STATUS_TYPE data struc-
ture) and the system variables it contains............................................ 72
Table 8-8: HMI_CONTROL system variable (HMI_CONTROL_TYPE data
structure) and the system variables it contains ....................................73
Table 8-9: System variables of the diagnostic status register ............................... 74
Table 8-10: System variables of the diagnostic parameter register ........................ 75
Table 8-11: PROFINET system variables (PROFINET controller functionality) ...... 76
Table 8-12: PROFINET system variables (PROFINET device functionality)...........77
Table 8-13: System variables of the master diagnostic status register ................... 78
Table 8-14: Example for error code 0A050
hex.......................................................................
79
Table 8-15: System variables of the master diagnostic parameter register............. 80