11
P H O E N I X G O L D I N T E R N A T I O N A L
F I L E
RECALL SETTING FROM DISK
Loads a saved project from a storage disk.
SAVE SETTING TO DISK
Quickly saves the project to the disk without changing the Project’s file-
name.
SAVE SETTINGS TO DISK AS
Saves the project to disk and allows the Project’s filename to be changed.
PRINT PROJECT FILE
Prints project information to a printer.
PRINT GRAPH
Prints project graphics response to a printer.
IMPORT PC RTAJR CURVE
Imports the .dat file from PC RTAjr to the TiDEQ Comp software. The TiDEQ
Comp software will then modify the sliders to the inverse of the PC RTAjr
.dat file, this will create a nearly flat response curve for simple RTA or
Sound Quality tweaking.
C A L E N D E R
Allows the current date to be viewed.
COPY PRESET TO ANOTHER
Allows separate presets to be copied from one to another without manually
changing sliders.
EDIT EXISTING PROJECT
Allows the existing project information to be edited.
E X I T
Exits the TiDEQ Comp program.
F U N C T I O N
TRANSMIT DATA TO DEVICE
Sends data from TiDEQ Comp software to the TiDEQ Comp.
RECALL DATA FROM DEVICE
Recalls the last stored data from the TiDEQ Comp to the TiDEQ Comp soft-
ware.
MUTE ALL CHANNELS
Mutes the left and right channels of the TiDEQ Comp.
UNMUTE ALL CHANNELS
Disables the muting of the left and right channels of the TiDEQ Comp.
LOCK DEVICE TO DISABLE UNAUTHORIZED TAMPERING
Allows the TiDEQ Comp to be “locked” so settings are not able to be
changed.
UNLOCK DEVICE
“Unlocks” the TiDEQ Comp so changes can be made to the settings.
PINK NOISE GENERATOR
Allows the pink noise generator to be turned ON or OFF for system tuning.
Be sure to adjust your volume settings on the TIDEQ COMP before turning
on.
S T A T U S
UPDATE DEVICE STATUS
Checks if the TiDEQ Comp is muted and or locked.
CHECK HARDWARE AND FIRMWARE VERSIONS
Displays the Hardware and Firmware versions on the TiDEQ Comp.
S E T U P
SETUP RS232 COMM PORT
Selects which of the computer’s COMM ports will be connected to the
TiDEQ Comp.
TURN RS232 ON/OFF
DEMO MODE
This allows projects to be changed and saved without being connected to
the TiDEQ Comp. When finished working in Demo Mode you must transmit
the changes to the TiDEQ Comp in PC Serial Mode for the changes to take
effect in the vehicle.
PC SERIAL PORT
The computer and TiDEQ Comp are connected together with a serial cable
via the COMM port. This is the only mode in which changes can be trans-
mitted from the TiDEQ Comp software to the TiDEQ Comp unit.
FACTORY CALIBRATION
For special use only by Phoenix Gold Factory Members.
A B O U T
PROJECT COMMENTS
Displays the current project’s comments.
ABOUT SOFTWARE
Presents the TIDEQ COMP software version number and information.
H E L P
Displays the TIDEQ COMP help file.
To Next Page
Loading...
