Need help?Do you have a question about the Phoenix Gold XS2300 and is the answer not in the manual?
General| Brand | Phoenix Gold |
|---|---|
| Model | XS2300 |
| Category | Amplifier |
| Language | English |
Adjusts amplifier power based on headunit signal strength, ranging from 0.1 to 3.
Boosts amplifier output by 0 to +18dB at 45Hz for enhanced bass response.
Connects headunits without pre-amp outputs using speaker wires.
Connects amplifier to speakers, specifying minimum impedance for stereo/bridged.
Controls the lowpass crossover point for the amplifier's output signal.
Indicates amplifier operational status and shuts off on fault conditions.
Connects pre-amp signal cables from headunit directly to amplifier terminals.
Bypasses the lowpass crossover, allowing direct signal input to the amplifier.
Enables remote subwoofer volume control using the optional LPL44.
Details connections for battery positive (B+), chassis ground (B-), and remote turn-on (R).
Protects the amplifier's power supply from improper connection or overcurrent.
Selects signal type (lowpass/highpass) for amplifier and auxiliary outputs.
Provides a signal opposite to the amplifier's crossover setting for another amplifier.
Covers inspecting vehicle electricals, planning component mounting, and routing cables.
Illustrates wiring and component layout for a single amplifier setup.
Shows wiring and component layout for multiple amplifiers using PowerFlow technology.
Details various wiring setups for the XS2300, including full range and bridged modes.
Details wiring setups for the XS2500, including stereo highpass and lowpass modes.
Details bridged lowpass speaker output and highpass auxiliary output for XS2500.
Provides precautions and recommendations for mounting the amplifier securely and safely.
Explains how to connect line-level and hi-level signals to the amplifier inputs.
Details the correct methods for connecting power, ground, remote, and speaker cables.
Covers changing crossover frequencies using RNet modules and custom calculations.
Step-by-step guide on accessing and replacing the RNet module inside the amplifier.
Instructions for setting input sensitivity and bass equalization controls on the amplifier.
Fine-tuning amplifier levels and overall system balance with music.
Guidelines for adjusting bass equalization and understanding its impact on power.
To Next Page