Phoenix Gold XS2300 blk User Manual

XS2300 blk
• Defeatable 18dB per octave highpass or lowpass crossover, adjustable from 40 to 800Hz.
• Auxiliary output to send lowpass or highpass signal to an additional amplifier.
• LPL ready, allows the use of an optional LPL44 Lowpass Level control to adjust subwoofer volume.
• Hi-level input capability for easy integration with most factory headunits.
• Tri-Linear™ capability allows simultaneous stereo and bridged mono operation.
• Adjustable TwinT™ bass equalization with +18dB of boost centered at 45Hz.
• 2 ohms bridged / 1 ohm stereo approved.
• Advanced muting circuitry eliminates turn-on and turn-off noises.
• Advanced thermal and overload protection.
• 2 layer, 2 ounce, copper G10 glass-epoxy printed circuit boards.
• Power-on LED indicator.
• Audiophile grade metal film capacitors and 1% metal film resistors.
• PWM Mosfet power supply.
• Gold plated power and speaker terminals.
• Glass filled nylon isolation mounting feet.
• Gold plated signal input and output jacks.
• XS linkable using the optional XS link to connect multiple amplifiers together.
Features
* For complete manuals, technical tips, FAQ’s, system diagrams and new product information visit us @

Phoenix Gold XS2300 blk Specifications

General

Channels	2
RMS Power at 4 Ohms	150W x 2
Frequency Response	20Hz - 20kHz
THD at Rated Power	<0.05%
Signal to Noise Ratio	>100 dB
Input Sensitivity	200mV - 4V
Crossover Frequency	40Hz - 400Hz
Bass Boost	0 to +18 dB
Fuse Rating	40A
Crossover	Variable Low Pass / High Pass

Summary

Product Features Overview

Amplifier Controls and Connections

Audio Outputs and Inputs

Describes auxiliary outputs for additional amps and pre-amp/high-level inputs.

Configuration Switch

Configures signal type for speaker and auxiliary outputs.

Speaker and Power Terminals

Details speaker connection terminals and power/ground connections.

Crossover and Bass Controls

Explains crossover frequency adjustment and bass boost.

Input Sensitivity and Filters

Covers input sensitivity adjustment and subsonic filter.

Indicators and Protection

Details power LED indicator and protection circuits.

Power and Remote Connections

Explains DC power fuse, remote turn-on, and battery terminals.

Amplifier Specifications

Limited Warranty Information