18
Delayed activation
Please be aware that your hearing instrument may
take several seconds to boot up.
Your hearing care professional may have activated
a further delayed activation timer. This function delays
the activation of the hearing system (for 9 or 15
seconds) after the battery door is closed in order to
avoid any disturbance while placing it into your ear.
An acoustic signal confirms when your hearing system
is switched on.
Note
The mute mode may be used like an ON/OFF function,
(activated manually via the myPilot command
center or via a Phonak remote control) allowing you
to switch your hearing system OFF for a short period
of time (i.e. while inserting or removing the instrument,
short breaks etc.). Please be aware that the mute
mode still consumes some energy from the battery.
Operation
To Next Page
Loading...
