Phonak CROS P User Manual

15
Low power: You will hear two beeps when the battery
is low. You will have approximately 30 minutes to
change the battery (this can vary, depending on the
hearing aid settings and battery). We recommend that
you always have a new battery on hand.
Please ensure you use the correct type of battery in
your CROS device (zinc-air). Please also read chapter
20.2 for further information on product safety.
Replacement battery
This CROS device requires a 13 zinc-air battery. Identify
the correct battery size by checking the following table.
Model
Phonak CROS
P-13T
Zinc-air
battery
size
13
Color
marking on
package
orange
IEC
code
PR48
ANSI
code
7000ZD

Phonak CROS P Specifications

General

Brand	Phonak
Model	CROS P
Category	Hearing Aid
Language	English