On/O
Multi-function button
Flight mode
The button has several functions.
It functions as a volume control in the
absence of wireless transmission of sound
from the CROS device to the hearing aid,
a balance control when there is a wireless
transmission of sound from the CROS
device to the hearing aid and/or
aprogram change depending on the
CROS device programming. This is
indicated in your individual instructions.
If paired with a Bluetooth enabled phone,
a short press will accept and a long press
will reject an incoming call.
To enter ight mode press the lower part
of the button for 7 seconds while closing
the battery door. To exit ight mode,
simply open and close the battery door
again.
OOn
9
To Next Page
Loading...
