Phonak Roger On User Manual

38 39
4. Check the feedback in the display of Roger On:
Connecting a receiver is only required once. The
hearing aid / Roger receiver will remain connected
with your microphone even after the hearing aid /
Roger receiver has been restarted.
Connect
successful
Receiver not
compatible
No receiver found,
go closer
10.2 Connecting another microphone
To connect another compatible Roger microphone with
your Roger On, follow the steps below. Please refer to
chapter 11 to learn how to use multiple microphones in a
network.
1. Switch on both Roger microphones.
2. Hold your Roger On close (within 10 cm/ 4 inches) to
the other Roger microphone.

Phonak Roger On Specifications

General

Microphone technology	MultiBeam Technology
Bluetooth connectivity	Yes
Water Resistance	IP54
Operating time	Up to 8 hours
Charging time	Up to 3 hours
Form factor	Wireless microphone
Microphone modes	Presenter
Compatibility	Roger receivers
Wireless Technology	Roger
Charging	USB charging
Type	Wireless microphone
Operating Range	Up to 20 meters