Phonak Roger Touchscreen User Manual

How to Connect with
Roger Touchscreen
General Operation
Device Description
1. On/Off
2. Wake/sleep
3. Indicator light
4. Microphones
5. Mute
6. Touchscreen
7. Micro-USB
8. Jack 3.5 mm/ 1/8
9. Feet
10. Lanyard: clip/remove button
11. Lanyard clip
12. Length adjustment
13. Safety breakaway
• To switch on, press the On/Off button on the side of the
Roger Touchscreen for 3 seconds. The green indicator
lights will flash until fully booted. The power indicator
light will continue to fade in and out green during use.
• To switch off, press the On/Off button on the side of
the Roger Touchscreen for 3 seconds. The indicator
lights will flash green 3 times and then turn off.
• When charging either with a USB power cord or in
the Roger Charging Rack, the indicator lights will flash
green and when fully charged will shine solid green.

Phonak Roger Touchscreen Specifications

General

Power Source	Rechargeable battery
Compatibility	Roger receivers
Microphone	Yes
Operating Range	20 meters
Display	Touchscreen
Charging Method	Micro-USB
Water Resistance	No

Summary

Device Overview and Operation

Roger Touchscreen Device Components

Identifies and labels the key parts and connections of the Roger Touchscreen device, including buttons, ports, and indicators.

General Operation and Charging

Explains how to power on/off the device, the function of indicator lights during operation, and the charging process.

Connecting to Computers and Tablets

Step-by-Step Connection Guide

Provides a five-step guide to connect the Roger Touchscreen to a computer or tablet using a 3.5 mm audio cable.