Need help?Do you have a question about the Phonic ACAPELA 16 and is the answer not in the manual?
General| Channels | 16 |
|---|---|
| Microphone Inputs | 8 |
| Line Inputs | 8 |
| Phantom Power | Yes |
| EQ | 3-band |
| Faders | 100mm |
| Built-in Effects | Yes |
| USB Interface | Yes |
| Type | Analog Mixer |
| Inputs - Line | 8 |
| Effects | 16 DSP effects |
| A/D Resolution | 24-bit |
| Inputs | 16 |
| Built-in digital effects processor | Yes |
| Outputs - Main | 2 x XLR |
| Outputs - Aux | 2 |
| EQ Bands | 3 |
| USB | 1 |
| Inputs - Mic Preamps | 8 |
Covers warnings related to water exposure, cleaning, ventilation, heat sources, and proper installation procedures.
Addresses plug safety, power cord protection, and guidelines for servicing by qualified personnel.
Highlights the main capabilities of the Acapela 16 digital mixer, including inputs, connectivity, and processing.
Details the Setup menu for clock source selection, signal generator, and internal sampling rate adjustments.
Covers selecting Wi-Fi or Ethernet, DHCP settings, and manual IP address configuration for network connection.
Instructions on how to save mixer settings as scenes to flash memory or USB, and how to recall them.
Explains controls for Gate, Expander, Compressor, and Limiter, including on/off, selection, and parameter adjustments.
Details the Delay function and the Order function for setting signal processing sequence (EQ, Dynamics, Delay).
Describes the EQ On/Off display, Dynamic Processor controls, and selection of dynamic processors like Gate, Expander, Compressor, Limiter.
Explains the Delay function and the Processing Order function for setting the sequence of EQ, Dynamics, and Delay effects.
Covers turning PEQ on/off, resetting, band on/off, plots, settings, and selecting EQ types (peaking, shelf, etc.).
Explains how to select and control Gate, Expander, Compressor, and Limiter, including on/off, selection, and parameter adjustments.
To Next Page
