Need help?Do you have a question about the Phonic AM844D and is the answer not in the manual?
General| Type | Analog Mixer |
|---|---|
| Channels | 8 |
| Microphone Inputs | 4 |
| Line Inputs | 4 |
| Phantom Power | Yes |
| USB Interface | No |
| Power Supply | External Power Adapter |
| EQ | 3-band EQ |
| Outputs | Main Out, Control Room Out |
Details on connecting microphones and line-level instruments to the mixer's XLR and Line In jacks.
Explanation of stereo input channels, including XLR for microphones and 1/4" jacks for line-level devices.
Inputs for RCA sources and outputs for recording devices.
Ports for headphone monitoring and socket for a gooseneck lamp.
Connections for direct mono channel output and line-level signal to stage monitors.
Outputs for the final stereo line level signal to external devices like amplifiers or PA systems.
Description of the power switch and phantom power switch located on the rear panel.
Explanation of gain, low cut filter, and +/-10dB input level adjustment for mixer channels.
Description of the digital display showing program numbers and Sig/Clip LEDs.
Controls for program selection, tap delay time setting, and turning the effect processor on/off.
Controls for adjusting signal levels of AUX returns 1, 2, 3 (EFX), and 4, with monitoring options.
Buttons to change signal destination from AUX returns to Main L/R or Group buses.
To Next Page
