Need help?Do you have a question about the Phonic AM442D USB and is the answer not in the manual?
General| Brand | Phonic |
|---|---|
| Model | AM442D USB |
| Category | Music Mixer |
| Language | English |
Read instructions, keep for reference, heed warnings, follow instructions.
Avoid water, condensation, and blocked ventilation openings.
Do not install near heat sources; follow manufacturer instructions.
Do not defeat safety purpose of polarized/grounding plug.
Protect power cord; use only specified attachments/accessories.
Refer servicing to qualified personnel for any damage.
Risk of electric shock, do not open cover, refer to qualified personnel.
Reduce risk of fire/electric shock; do not expose to rain/moisture.
Avoid hazardous radiation exposure from incorrect controls/procedures.
Connects mixer to computer for stereo audio transfer.
Activates +48V phantom power for microphone inputs.
Adjusts input signal sensitivity for Line/Microphone inputs.
Controls onboard compressor function and indicates when triggered.
Adjusts signal level to AUX 1 mix and alternates pre/post fader feed.
Controls signal level to EFX send and built-in digital effect processor.
Scrolls through effects and sets tap-delay time.
Turns the corresponding effect panel on or off for AM642D USB.
Adjusts final level of AUX mixes sent to AUX send outputs.
Adjusts final level of EFX mixing bus sent to AUX Send 2/3.
Adjusts audio level for phones feed and Control Room output.
To Next Page
