Need help?Do you have a question about the Phonic AM844D USB and is the answer not in the manual?
General| Type | Analog Mixer |
|---|---|
| Channels | 8 |
| USB Interface | Yes |
| Phantom Power | Yes |
| EQ | 3-band |
| EQ per Channel | Yes |
| Faders | 60mm |
| Dimensions | 348 x 91 x 444 mm |
| Weight | 4.8 kg |
| Aux Sends | 1 |
| Headphone Output | Yes |
Lists hardware and OS requirements for Windows users.
Lists hardware and OS requirements for Mac users.
Initial steps for powering up and preparing the mixer for use.
Guide for setting audio levels for each input channel.
Steps to connect and configure the mixer on Windows.
Steps to connect and configure the mixer on Mac.
Details on XLR and 1/4" TRS/TS line inputs for mono/stereo channels.
Describes RCA inputs for tape/CD players and outputs for recorders.
Details headphone outputs and gooseneck lamp connection.
Outputs for direct signals and jacks for external processors.
Outputs for stage monitors and main mix signals.
Main inserts, monitoring outputs, and effect control port.
Group outputs, AUX returns, USB, and power connections.
Controls for powering the unit and activating phantom power.
Adjusts compression, input level, and frequency response.
High-pass filter and EQ controls for treble and bass.
Controls for auxiliary sends and stereo imaging.
Activates channels and selects signal path to buses.
Signal peak indicator and channel isolation button.
Channel output fader and digital effect engine settings.
Adjusts signal levels for AUX Returns 1 through 4.
Buttons for routing returns and soloing return signals.
Adjusts final levels for AUX sends and solos them.
Master solo, USB return, and monitoring adjustments.
Selects monitoring sources and status indicators.
Displays audio levels for Main L/R and Solo signals.
Faders for final level control of group outputs 1-8.
Final level control for the main stereo mix output.
Lists types and counts of all mixer inputs and outputs.
Details on channel and master section features.
Technical performance metrics for audio quality.
S/N ratio and microphone preamp noise specifications.
Specifications for signal integrity and maximum output.
Lists impedance values and EQ band parameters.
Details on low cut filter and USB audio capabilities.
Specs for effects, power, physical size, and weight.
Details product warranty coverage, terms, and claims.
Provides contact information for assistance and online resources.
To Next Page
