Need help?Do you have a question about the Phonic AM220 and is the answer not in the manual?
General| Brand | Phonic |
|---|---|
| Model | AM220 |
| Category | Music Mixer |
| Language | English |
Details the 3-pin XLR inputs for balanced and unbalanced signals, suitable for various microphone types.
Describes 1/4" TRS or TS inputs for balanced or unbalanced signals, used with line-level devices.
Explains the 1/4" TRS phone jacks for line level inputs, offering flexibility for various instruments.
Describes the final unbalanced line level signal send from the main mix to external devices.
Details 1/4" TS inputs for audio return from external signal processors, used with the AM 220.
Controls input signal sensitivity for Line/Mic inputs to achieve optimal audio levels.
Adjusts treble frequencies (12 kHz) with a shelving boost or cut for added crispness.
Adjusts mid frequencies (2.5 kHz) with a peaking boost or cut, useful for vocal shaping.
Adjusts bass frequencies (80 Hz) with a shelving boost or cut for warmth and punch.
Alters signal level sent to the EFX SEND output, post fader (AM220 only).
Adjusts audio level distribution between left and right channels or stereo balance.
LED indicator illuminates for high peaks, 6 dB before overload occurs.
Controls signal level sent from the channel to the main mixing bus.
Adjusts the signal level fed through to the AUX Stereo Return inputs for mixing.
Selects the destination for the 2T Return signal (Main L/R, Phones, or Ctrl Rm).
Activates +48V phantom power for microphone inputs, essential for condenser mics.
Adjusts audio level for phones and Control Room outputs for monitoring.
Final level control for the main left and right audio feed sent to the output.
Provides an indication of MAIN L/R output audio levels via a dual 4 segment indicator.
Indicator light shows when the mixer's power is on.
To Next Page
