Need help?Do you have a question about the Phonic DB2 and is the answer not in the manual?
General| Brand | Phonic |
|---|---|
| Model | DB2 |
| Category | Signal Processors |
| Language | English |
WARNING - DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE to reduce the risk of fire or electric shock.
Advice on avoiding liquids, heat, user-serviceable parts, cleaning, and checking packaging for damage.
Highlights professional, multifunctional, and rugged aspects including Ground/Lift, Pad attenuation, and power options.
Step-by-step instructions for battery installation, source connection, mixer connection, and amplifier connection.
Increases operating range by attenuating signal by -20dB or -40dB for various input levels.
The 1/4" unbalanced jack for connecting the audio source to the DB2.
Provides a direct connection to a guitar amplifier or active speaker from the input signal.
Enables or disables the 9V battery power supply, allowing phantom power use.
Breaks the ground connection to eliminate hum and ground loops when set to LIFT.
Balanced XLR female connector for outputting the signal to a mixer's mic input.
Instructions on how to open the cover using a coin to replace the battery.
Information on contacting distributors or Phonic directly for gear and accessories.
Guidance on locating service centers, replacement parts, and avoiding self-repair.
Details on warranty coverage, duration, claims, and conditions for validity.
Resources for online help, FAQs, tech tips, driver downloads, and contact information.
To Next Page
