Need help?Do you have a question about the Phonic PCL 3200 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Sidechain I/O | 1/4" TRS |
| Signal to Noise Ratio | >95dB |
| Input Impedance | Balanced 20k ohms, Unbalanced 10k ohms |
| Type | Compressor/Limiter |
| Controls | Threshold, Ratio, Attack, Release |
| Inputs | XLR, 1/4" TRS |
| Outputs | XLR, 1/4" TRS |
| Metering | LED Gain Reduction Meter |
| Frequency Response | 20Hz - 20kHz |
| Power Supply | 100-240V AC, 50/60Hz |
| Dimensions | 19" x 1.75" x 8.5" |
Details controls for signal compression and limiting, including threshold and ratio.
Explains noise gate functions and controls for signal attenuation below a threshold.
Covers master controls like Peak/RMS mode, Stereo/Dual Link, and Bypass.
Details rear panel jacks for input, output, side-chain, and power connection.
Illustrates lowering background music levels during narration or vocals.
Demonstrates setup for de-essing using EQ and side-chain connection.
Guides on product maintenance, repairs, and authorized service centers.
Explains warranty coverage, terms, and conditions for product defects.
Provides contact information and resources for customer assistance and technical help.
To Next Page
