Phonic MM1202 User Manual

PHONIC CORPORATIONMM1002 / MM1202 USER’S MANUALPage 4
INTRODUCTION / FEATURES / GETTING STARTED
MM1202
l 12 standard inputs
l 4-balanced Mic/Line input channels with 3 band
EQ. Able to accept a wide range of Microphone
and Line level from Neutrik combo connector
l 4 stereo inputs with +4/-10 input sensitivity
selector.
l Additional 2T return inputs, for CD playback or
link to another submixer
l Global +48V phantom power switch on 1-4
channel at master section
l Separate Mix and Control Room output
l M/S switch
l Record output
l Meter indicator switch allows meter to show MS/
ST/Headphone level
l Headphone output
l Peak indicators on each mono input channel
GETTING STARTED
1. Check the AC voltage before connecting the AC
plug. This product is equipped with a 3-wire
grounding type plug; this is a safety feature and
should not be defeated. Proper grounding is a
necessary practice to prevent electric shock
hazards to the operator, the microphone user,
and the musicians who are wired to this unit.
2. Before switching on the main power, keep all the
output fader all the way down to prevent damage
or excessive noise caused by bad level
adjustment, wrong wiring, defective cables, or bad
connection.
3. Always turn on the mixer before the power
amplifier; turn off the mixer after the amplifier.
4. Always turn off the unit before connecting and
disconnecting the unit from the power source.
5. Never use solvents to clean the unit. Clean with
a soft, dry cloth.
INTRODUCTION
Congratulations on your purchase of the MM serial
Mixer. The MM serial mixer is built into a rugged
construction, which is ideal for small live gigs, re-
cording and fixed PA installations. In order to get
the best performance from the mixer, please read
this user’s manual carefully. Please familiarize your-
self with the new and different functions on this mixer.
FEATURES
MM1002
l 10 standard inputs
l 2 balanced Mic/Line input channels with 2 band
EQ. Able to accept a wide range of Microphone
and Line level from Neutrik combo connector
l 4 stereo inputs with +4/-10 input sensitivity se-
lector
l Additional 2T return inputs, for CD playback or
link to submixer
l Global +48V phantom power switch on 1-2 chan-
nel at master section
l Separate Mix and Control Room output
l M/S switch
l Record output
l Meter indicator switch allows meter to show MS/
ST/Headphone level
l Headphone output
l Peak indicators on each mono input channel

Phonic MM1202 Specifications

General

Brand	Phonic
Model	MM1202
Category	Music Mixer
Language	English