Phonic performer A220 - Safety Instructions

Performer User's Manual PHONIC CORPORATION
page 4
PHONIC CORPORATION Performer User's Manual
page 5
SAFETY INSTRUCTIONS
1. Read all instructions carefully before using your Performer Active Speakers.
2. Keep this user's manual for future reference.
3. Please carefully follow all instructions.
4. Do not use these speakers with ampliers or the powered output of a powered mixer. They should only
be used with a mic- or line-level input. An amplier generates a much higher current level which will
damage Performer active speakers.
5. Warning - Performer active speakers generate extremely high sound pressure levels. Take care in the
placement and operation of speakers to avoid prolonged exposure to extremely high sound levels. Long
exposure to high sound pressure levels may cause permanent hearing loss.
6. Cables - You should use properly functioning cables with XLR-type and 1/4" phone connectors to
connect microphones or mixers to the Performer active speakers.
7. Mounting - The suspending, rigging and mounting of Performer active speakers can cause members
of the public to be exposed to serious risk or even death in the event that a poorly installed speaker
should come loose and fall. If you are NOT fully qualied and certied by relevant local, state or national
authorities to mount these speakers, call a qualied technician to install them and do not install them
yourself. All relevant safety regulations must be followed. If you are not completely qualied, or there
are no regulations in your area governing said installation, please consult qualied personnel for
assistance.
8. Servicing - Do not under any circumstances try to service this product yourself. If servicing is required,
contact your local service center.