Physio Logic Smart Inflate - Recalling Memory; Time Adjustment

8
Recalling Memory
1. To recall stored blood pressure readings from memory, simply
press the Memory button. The last set of memorized readings
will be displayed.
2. Another press of the Memory button will recall the previous set
of readings.
Time Adjustment
1. Press and hold the ( ) button for
more than 3 seconds to enter Time
Adjustment Mode. The display
will show a blinking Month.
2. Press the “ ” or “ ” to change the
Month.
3. Press the ( ) button again to
confirm the entry.
4. The display will then show a
blinking Date, followed by Hour
and Minutes. Repeat steps 2 and 3
to adjust the date/time setting.
+–
Hold for
more than
3 seconds
Blinking
month
Changing
month
Confirm
the
entry
or