Phytec i.MX 93 - Page 43

i.MX 93 BSP Manual PD24.1.1 Documentation Rev.: imx8mp-pd22.1.2-51-ga548be7d
• Now you can mount the new partition and copy e.g. phytec-qt6demo-image-phyboard-segin-imx93-
2.wic image to it. Then unmount it again:
host:~$ sudo mount /dev/sde3 /mnt
host:~$ sudo cp phytec-qt6demo-image-phyboard-segin-imx93-2.wic /mnt/ ; sync
host:~$ umount /mnt
Development 39