pi-top.com | © 2021 CEED Ltd.
Page 2
pi-top [4] Robotics Kit | Alex Build Instructions
What can Alex do?
Alex is a conguration designed for
autonomous driving and AI projects.
It incorporates a Pan-tilt Servo Motor mechanism mounted
on the front which gives the wide-angle camera sensor two
degrees of freedom - a full 180° of range in both axes. Its
Ultrasonic Sensor is also attached to the Pan-Tilt Servo Motor
mechanism which enables Alex to perform full 180° scans
to look for possible obstacles. Finally, the two high accuracy,
high power Encoder Motors are positioned at the front of the
vehicle; allowing for more accurate positioning for projects
such as line-following.
The pi-top [4] Robotics Kit oers ultimate modularity and
expandability, allowing you to customise or design any
conguration to suit your needs. Alex provides a large
range of sensor mounting points so you can adapt and
change it rapidly to suit the needs of your projects.
Need help?
pi-top.com
/support
pi-top.com | © 2021 CEED Ltd.
Page 2
pi-top [4] Robotics Kit | Alex Build Instructions
To Next Page
Loading...