Engine oil - replacement
Brake pads - check condition and wear
Sliding block / variable speed rollers - change
Tyre pressure and wear - check
Vehicle and brake test - test ride
Hub oil - check
Stand control roller - replace
Crankcase breather - empty
Suspensions - check
Steering - Check
Injection system pipework - visual check
Fuel filter - check
RECOMMENDED PRODUCTS TABLE
Product Description Specifications
AGIP ROTRA 80W-90 Rear hub oil SAE 80W/90 Oil that exceeds the
requirements of API GL3 specifications
AGIP GP 330 Grease for brake control levers, throttle, stand White calcium complex soap-based spray
grease with NLGI 2; ISO-L-XBCIB2
AGIP CITY HI TEC 4T Oil to lubricate flexible transmissions (throttle
control)
Oil for 4-stroke engines
AGIP BRAKE 4 Brake fluid FMVSS DOT 4 Synthetic fluid
SPECIAL AGIP PERMANENT coolant Monoethylene glycol-based antifreeze fluid,
CUNA NC 956-16
79
To Next Page
Loading...
