Recommended products
AGIP GEAR SAE 80W-90
Lubricant for gearboxes and transmissions.
API GL-4
Characteristic
rear oil hub
Quantity: approx. 85 cm³
03_04
Tyres (03_04)
Periodically check the inflation pressure of each tyre (when cold).
Tyres are fitted with wear indicators; tyres should be replaced as soon as these indi-
cators become visible on the tyre tread. Also check that the tyres do not show signs
of splitting at the sidewalls or irregular tread wear; If this occurs, go to an authorised
workshop or at least a workshop adequately equipped to remove and refit tyres.
CAUTION
TYRE PRESSURE SHOULD BE CHECKED WHEN TYRES ARE COLD.INCOR-
RECT TYRE PRESSURE CAUSES ABNORMAL TYRE WEAR AND MAKES RID-
ING DANGEROUS.
TYRES MUST BE REPLACED WHEN THE TREAD REACHES THE WEAR LIMITS
SET FORTH BY LAW.
Characteristic
Front tyre pressure
2 bar
29
To Next Page
Loading...
Need help?
General
