01_07
- the current hour and minutes in format «hh:mm». Set the correct time as described
in the paragraph «Set functions hours/minutes».
01_08
01_09
Setting the hour/minutes function (01_08, 01_09, 01_10)
To set or adjust the time, with vehicle running or with ignition switch in «ON» position,
proceed as follows:
- press the «MODE» key for a couple of seconds to display the total odometer;
- with a long press of the «MODE» key, the number of hours flashes in "hh" format;
- adjust the hour by short pressing the MODE key;
- with a long press, the set value is confirmed (or present value if not modified) and
the minutes value, in format «mm» starts flashing.
- adjust the minutes by short pressing the MODE key;
- with a long press, the set value is confirmed (or present value if not modified) and
the clock adjustment is exited;.
If, during the adjustment procedure, the «MODE» key is not pressed for a time longer
than ten seconds, the procedure is interrupted and clock value remains the same as
before the adjustment; repeat the adjustment operations.
WARNING
FOR SAFETY REASONS THE TIME SETTING IS ONLY POSSIBLE WITH THE VE-
HICLE AT A STANDSTILL.
13
To Next Page
Loading...
Need help?
General
