Tilt locking gripper control cable - adjustment
Transmission elements - lubrication
Safety locks - check
Suspensions - check
Electrical system and battery - check
Headlight - adjustment
Tyre pressure and wear - check
Vehicle and brake test - road test
Driving Belt - replacement
(*) See instructions in «Idle speed adjustment» section
AFTER 30,000 KM, AFTER 42,000 KM AND AFTER 66,000
KM
Hub oil level - check
Spark plug/ electrode gap - check
Air filter - clean
Sliding blocks / variable speed rollers - check
Driving belt - check
Coolant level - check
Brake pads - check condition and wear
Brake fluid level - check
Tilt locking gripper control cable - adjustment
99
To Next Page
Loading...
