What to do if my Piazzetta P958 is switching off during the start phase?
If your Piazzetta Pellet stove switches off during the start phase, empty the grate completely before initiating a new ignition cycle. Keep the ON/OFF key pressed down to clear the display and return to the initial screen.
What to do if my Piazzetta Stove failed ignition?
If your Piazzetta Stove fails to ignite, begin by shutting down the stove by pressing the ON/OFF key for a few seconds. Then, restart the stove by pressing the ON/OFF key again. If the issue persists, check the pellet composition and size to ensure they comply with the specifications in the “FUEL” section of the manual, and verify that the mains voltage is sufficient and stable. Always remove any fuel from the grate before starting a new ignition process.
Why is my Piazzetta Pellet stove failing to ignite?
A Piazzetta Pellet stove might fail to ignite because the flue gas outlet sensor isn't detecting a temperature increase, or there's no pellet feed. To resolve this, shut down the stove by pressing the ON/OFF key until 'CLEANING BRAZIER' appears, and then 'OFF' after cooling. Empty the grate and initiate a new ignition cycle, referring to the 'LOAD AUGER' table in the PARAMETERS MENU. Then, repeat the ignition process. Also, ensure the pellet composition and size meet the specifications in the “FUEL” section of the manual, and that the mains voltage is sufficient.
How to manually light a Piazzetta Pellet stove in an emergency?
If the glow plug in your Piazzetta pellet stove isn't working, you can manually light it by following these steps: - Pour a small quantity of pellets into the grate. - Use a lit piece of solid firelighter (not liquid) to ignite the pellets. - Close the door. - Start the stove using the ON/OFF button.
Specifies minimum safety distances from heat-sensitive materials and walls.
Requirements for optimal vent termination location considering external factors.
Details the specific characteristics of recommended high-quality pellets.
Guidance for the initial lighting process and settling the stove body.
Lists potential problems and their solutions for ignition failures.
Explains the various safety devices and potential warnings.
Troubleshooting for display issues and basic safety device faults.
Troubleshooting for issues causing the appliance to shut down during use.
General| Brand | Piazzetta |
|---|---|
| Model | P958 |
| Category | Pellet stove |
| Language | English |
To Next Page
