What happens if there is a power failure with my Piazzetta Pellet stove?
If there's a power failure, the Piazzetta pellet stove will restart automatically once the electricity is back. The grate cleaning phase will begin, and the display will show “CLEANING”. The room fan will run at full speed to distribute stored heat. The stove will then repeat the startup cycle and resume normal operation at power level 2 with Multifuoco on 2.
How to fix a failed ignition on a Piazzetta Pellet stove?
If the Piazzetta Pellet stove fails to ignite, shut it down by pressing the ON/OFF key for a few seconds until the buzzer stops. Wait for the display to show “CLEANING BRAZIER” and then “OFF”. Empty the grate completely, and then start a new ignition cycle referring to the LOAD AUGER table in the PARAMETERS MENU. Repeat the ignition process.
How to manually light a Piazzetta P963 Pellet stove in an emergency?
In case the glow plug of your Piazzetta Pellet stove isn't working, you can manually light the stove. Pour a small amount of pellets into the grate, use a lit solid firelighter (not liquid) to ignite the pellets, close the door, and then start the stove using the ON/OFF button.
What to do if my Piazzetta P963 Pellet stove switches off during the start phase?
If the Piazzetta Pellet stove switches off during the start phase, empty the grate completely before starting a new ignition cycle. Press and hold the ON/OFF key to clear the display and return to the initial screen.
Why does my Piazzetta Pellet stove say 'WAIT FOR START UP'?
If your Piazzetta Pellet stove displays 'WAIT FOR START UP' when you press the ON/OFF key, it means the stove is still too hot. You need to wait for it to cool down before it will start a new ignition cycle. The stove will not start a new cycle until the cooling phase is complete.
General| Brand | Piazzetta |
|---|---|
| Model | P963 |
| Category | Pellet stove |
| Language | English |
To Next Page
