Need help?Do you have a question about the PICASO 3D Designer X PRO and is the answer not in the manual?
Overview of the integrated software and hardware solutions.
Details on printing technology, materials, and mechanics.
Information on software, power, and key printer features.
Printer dimensions and overall weight.
Requirements for setting up the printer's operating environment.
Contents of the included starter kit and tools.
Identification of printer components visible from the front.
Identification of printer components visible from the back and sides.
Identification of internal printer components.
Navigating and using the printer's on-screen menu system.
Procedure for adjusting and leveling the print platform.
Step-by-step instructions for loading filament into the printer.
Preparation and process for starting a print job.
Procedure for removing filament from the printer.
Steps for removing and installing printer nozzles.
Adjusting the nozzle's vertical distance to the build plate.
Aligning the nozzles in the XY plane for dual-material printing.
Calibrating the automatic nozzle cleaning system.
Procedure for updating the printer's firmware.
Codes and descriptions of printer errors.
Explanation of printer status via color and lighting modes.
Overview of the debug screen and parameter descriptions.
General| Technology | FDM (Fused Deposition Modeling) |
|---|---|
| Build volume | 200 x 200 x 210 mm |
| Connectivity | USB, SD Card |
| Filament Diameter | 1.75 mm |
| Heated Bed | Yes |
| Bed Temperature | Up to 110°C |
| Nozzle Temperature | Up to 260°C |
| Nozzle diameter | 0.4 mm |
| Print speed | Up to 100 mm/s |
| Materials | PLA, ABS, PETG |
| Display | Color LCD |
To Next Page
