Pickle-ball SwiftNet User Manual

Page 1 of 9
SwiftNet™ Installation Instructions
Safety: Please be very certain to only put the Tensioning Boom in the Netting
when the Netting is lying flat on the ground. Never try to insert the Boom into
the Netting Top End Caps with the Netting standing up. Doing so would require
placing the Boom under tension by hand, which could result in possible injury.
Video: Please review the installation video with Pickleball Pro Glen Peterson
first before trying to assemble the system as he shows you how to do it quickly
and easily. The video can be found at:
https://www.pickleball.com/SwiftNet-Portable-Pickleball-Net-p/pb05.htm
The SwiftNet™ from Aero Sports Equipment consists of six main components:
1 – Center Net Support (shaped like an “A) – “Net Support” - A
1 - Shock Corded Carbon Fiber Tensioning Boom (8 sections corded together) – “Boom” - B
2 - Carbon Fiber Base Leg Pairs (interchangeable for left or right side) with Vertical Support– “Base” – C
 On each base is a Vertical Support (small black metal shaft pointing up) – C-1
1 - Netting with 2 Carbon Fiber Posts attached – “Netting” - D
1 – Center Net Strap Adjuster – “Adjuster” - E
A
E
C
B
D
C-1

Pickle-ball SwiftNet Specifications

General

Brand	Pickle-ball
Model	SwiftNet
Category	Accessories
Language	English

Summary

SwiftNet Installation Instructions

SwiftNet Installation Safety and Component Overview

Key safety warnings and an overview of the SwiftNet system components for initial setup.

SwiftNet Assembly Steps 1-4

Instructions for opening the carry bag, base legs, unrolling netting, and assembling the tensioning boom.

SwiftNet Step 5: Attach End Posts to Base

Procedure for connecting the netting end posts to the base supports, ensuring secure engagement.

SwiftNet Tensioning and Center Support Setup

Guides for tightening the netting cord and positioning the center net support correctly.

SwiftNet Height Adjustments

Steps for adjusting the outside net height and the center net height using straps and base legs.

SwiftNet Disassembly Instructions

SwiftNet Disassembly Safety and Initial Steps

Safety warnings and procedures for removing center stand, undoing strap, and releasing tension.

SwiftNet Disassembly: Separating Components

Instructions for detaching netting from bases, disassembling the boom, and gathering the netting.

SwiftNet Step 7: Fold Base Legs

Procedure for folding the base legs into their closed position for storage in the carry bag.

SwiftNet Limited Warranty and Care