Important Safety Instruction
1. Do not block any ventilation openings. To ensure
reliable operation of the projector and to protect
from over heating, it is recommended to install
the projector in a location that does not block
ventilation. As an example, do not place the
projector on a crowded coffee table, sofa, bed, etc.
Do not put the projector in an enclosure such as a
book case or a cabinet that restricts air flow.
2. Do not use the projector near water or moisture.
To reduce the risk of fire and/or electric shock, do
not expose the projector to rain or moisture.
3. Do not insta
ll near heat sources such as radiators,
heaters, stoves or any other apparatus such as
amplifiers that emits heat.
4. Do not use the projector in direct sunlight.
5. Do not use near any appliance generating a strong
magnetic field.
6. Do not use the projector in areas susceptible to
excessive dust and dirt.
7. Turn off the product before cleaning.
8. Turn off the product before removing the battery.
9. Disconnect the battery if the product is not being
used for a long period of time.
10. Ensure that the ambient room temperature is
within 5- 35°C.
11. Relative Humidity is 5 - 35°C, 80% (Max.), non-
condensing.
12. Do not expose the battery to temperatures above
+60°C (+140°F)
13. New or idle batteries can have short-term reduced
capacity. Fully charge the battery before initial use.
14. Do not put the battery into your mouth.
15. Do not let the battery contacts touch another metal
object.
16. Do not drop, throw or try to bend your product.
17. May explode if disposed of in fire.
18. Clean only with dry cloth.
19. Only use attachments/accessori
es specified by the
manufacturer.
20. Do not use the unit if it has been physically
damaged or abused. Physical damage/abuse
would be (but not limited to):
▀■ Unit has been dropped.
▀■ Charger or plug has been damaged.
▀
■ Liquid has been spilled on to the projector.
▀■ Projector has been exposed to rain or moisture.
▀■ Something has fallen in the projector or
something is loose inside.
Do not attempt to service the unit yourself.
Opening or r
emoving covers may expose you
to dangerous voltages or other hazards. Please
contact your local reseller or service center before
you send the unit for repair.
21. Do not let objects or liquids enter the projector.
They may touch dangerous voltage points and
short out parts that could result in fire or electric
shock.
22. See projector enclosure for safety related markings.
23. The unit should only be repaired by appropriate
service personnel.
24. Do not touch the projector for a long time while
the projector is used.
English
To Next Page
Loading...
Need help?
General
