PICO PicoScope 3000 A Series

To Next Page

To Previous Page

Prog ramming the 3000A Series oscilloscopes54

2.12.28

ps3000aIsTriggerOrPulseWidthQualifierEnabled

PICO_STATUS ps3000aIsTriggerOrPulseWidthQualifierEnabled

(

short handle,

short * triggerEnabled,

short * pulseWidthQualifierEnabled

)

This function discovers whether a trigger, or pulse width triggering, is enabled.

Applicability

Call after setting up the trigger, and just before calling either

ps3000aRunBlock or ps3000aRunStreaming.

Arguments

handle, the handle of the required device

* triggerEnabled, on exit, indicates whether the trigger will

successfully be set when ps3000aRunBlock or ps3000aRunStreaming is

called. A non-zero value indicates that the trigger is set, zero that

the trigger is not set.

* pulseWidthQualifierEnabled, on exit, indicates whether the

pulse width qualifier will successfully be set when ps3000aRunBlock or

ps3000aRunStreaming is called. A non-zero value indicates that the

pulse width qualifier is set, zero that the pulse width qualifier is not

set.

Returns

PICO_OK

PICO_INVALID_HANDLE

PICO_NULL_PARAMETER

PICO_DRIVER_FUNCTION

Other manuals for PICO PicoScope 3000 A Series