PICO PicoScope 3000 A Series

Prog ramming the 3000A Series oscilloscopes76
Copyright © 2011-2013 Pico Technology Limited. All rights reserved.ps3000abpg.en r9
2.12.47
ps3000aSetNoOfCaptures
PICO_STATUS ps3000aSetNoOfCaptures
(
short handle,
unsigned short nCaptures
)
This function sets the number of captures to be collected in one run of rapid block
mode. If you do not call this function before a run, the driver will capture only one
waveform. Once a value has been set, the value remains constant unless changed.
Applicability
Rapid block mode
Arguments
handle, the handle of the device
nCaptures, the number of waveforms to capture in one run
Returns
PICO_OK
PICO_INVALID_HANDLE
PICO_INVALID_PARAMETER
PICO_DRIVER_FUNCTION