PICO PicoScope 3000 A Series Programmer's Guide

PicoScope 3000A Series Prog rammer's Guide 85
Copyright © 2011-2013 Pico Technology Limited. All rights reserved. ps3000abpg.en r9
PS3207B_MAX_SIG_GEN_BUFFER_SIZE (3207B model)
sweepType, determines whether the startDeltaPhase is swept
up to the stopDeltaPhase, or down to it, or repeatedly swept up
and down. Use one of these values: -
PS3000A_UP
PS3000A_DOWN
PS3000A_UPDOWN
PS3000A_DOWNUP
operation, the type of waveform to be produced, specified by
one of the following enumerated types:
PS3000A_ES_OFF, normal signal generator operation specified by
wavetype.
PS3000A_WHITENOISE, the signal generator produces white
noise and ignores all settings except pkToPk and
offsetVoltage.
PS3000A_PRBS, produces a random bitstream with a bit rate
specified by the start and stop frequency.
indexMode, specifies how the signal will be formed from the
arbitrary waveform data. Single, and dual index modes are possible.
Use one of these constants:
PS3000A_SINGLE
PS3000A_DUAL
Arguments
shots, see ps3000aSigGenBuiltIn
sweeps, see ps3000aSigGenBuiltIn
triggerType, see ps3000aSigGenBuiltIn
triggerSource, see ps3000aSigGenBuiltIn
extInThreshold, see ps3000aSigGenBuiltIn
Returns
PICO_OK
PICO_AWG_NOT_SUPPORTED
PICO_POWER_SUPPLY_CONNECTED
PICO_POWER_SUPPLY_NOT_CONNECTED
PICO_BUSY
PICO_INVALID_HANDLE
PICO_SIG_GEN_PARAM
PICO_SHOTS_SWEEPS_WARNING
PICO_NOT_RESPONDING
PICO_WARNING_EXT_THRESHOLD_CONFLICT
PICO_NO_SIGNAL_GENERATOR
PICO_SIGGEN_OFFSET_VOLTAGE
PICO_SIGGEN_PK_TO_PK
PICO_SIGGEN_OUTPUT_OVER_VOLTAGE
PICO_DRIVER_FUNCTION
PICO_SIGGEN_WAVEFORM_SETUP_FAILED

PICO PicoScope 3000 A Series Specifications

General

Brand	PICO
Model	PicoScope 3000 A Series
Category	Test Equipment
Language	English