13
Cleaning and Care:
NOTE: Always unplug the unit from the mains
before cleaning.
NOTE: Clean the unit regularly to ensure
optimal performance.
Cleaning the Housing:
• To clean the unit’s housing, wipe it down
with a soft, damp cloth.
• Never use aggressive chemicals, gasoline,
detergents, chemically treated cloths
or other cleaning solutions to clean the
unit, as this may cause damage to its
components.
Cleaning the Filter:
• This unit is equipped with a removable
and washable filter, for easy cleaning and
maintenance.
• To wash the filter, begin by removing it
from its slot at the bottom of the unit, as
shown in the picture below.
• When the filter has been removed from
the unit, rinse it under running water, as
shown in the picture below, and leave it
to dry thoroughly.
Storing the Appliance:
1. Drain any water inside the tank.
2. Operate the unit in ventilation only mode
for a few hours to thoroughly dry the
interior.
3. Clean or change the filter.
4. Remove the exhaust pipe and store it
accordingly.
5. Unplug and store the power cord.
6. Place the unit back into its original box
and store it in a cool, dry place, preferably
covered with a protective plastic sheet
or bag.
To Next Page
Loading...
Need help?
General
