Pifco PS012N - Cleaning and Care

9
www.pifco.co
To attach the Jet Nozzle:
Insert the Jet Nozzle into the designated hole
in the Main Body until it locks in place with the
Lock Button on the Main Body (You will hear a
clicking sound), as illustrated in Fig. 6.
To t all accessories:
All accessories that attach to the jet nozzle
end, x by clicking in place and turning slightly
clockwise to secure in position.
They can be used with soap or detergent to
clean dirty areas.
WARNING: Never use the round brass brush
on soft surfaces such as plastic or soft metals
as they are prone to scratching.
When changing any of the attachments it
is recommended the appliance is switched
o and allowed to cool before changing or
adding the attachments
Window cleaning/garment cleaning:
This attachment is used to clean windows and
at glass products such as mirrors also this
attachment can be used for cleaning garments.
Too Fit the Squeegee attachment: Clip onto the
steamer shelf.
Too clean clothing: attach the steamer cloth.
To Fit the cover: Pull the elasticated steamer
cloth (Attachment 16) over the steamer shelf
(Attachment 17) This is now ready for use.
Also there is a squeegee blade for use on
windows & mirrors (Attachment 18).
WARNING: Do not use on frozen windows,
as the thermal shock may cause the glass to
crack or shatter. When cleaning fabrics where
possible it is recommended that you check
the fabric label to ensure that the fabric will
withstand the temperatures generated by the
steam or for large items or items that are not
labelled use a test area that will not be visible. It
is always best to have the material hanging as
this will aid with the eradication of creases on
the fabric item or clothing.
Fabric will be hot after the steam has been
applied.
Always test on a small piece of fabric before
use.
CLEANING AND CARE
Limescale:
If you live in a particularly hard water area, we
recommend using bottled or distilled water.
Warning: never pour vinegar or other liquid
cleaners for eliminating calcium into water tank.
After using the steam mop:
Disconnect power supply, allow Steam Mop
to cool completely and empty the water left
in water tank. Let the Steam Mop completely
cool down, clean with a damp cloth or a non-
abrasive (liquid) cleaner.
Fig 6
WARNING:
DO NOT IMMERSE ANY ELECTRICAL PART
OF THE APPLIANCE IN WATER SUCH AS
MOTOR UNITS OR PLUGS.
PLEASE SEE CLEANING SECTION FOR
FURTHER INSTRUCTIONS.