EasyManua.ls Logo

Pilatus PC-24 - Parking

Pilatus PC-24
114 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parking
1 Preliminary Requirements and Safety Conditions
WARNING
WHEN WORKING AT HEIGHT USE A SERVICEABLE PLATFORM OF THE CORRECT
TYPE AND HEIGHT. MAKE SURE THAT THE PLATFORM IS STABLE. IF THE
PLATFORM IS NOT STABLE, PERSONNEL CAN FALL, THIS CAN CAUSE DEATH OR
INJURY TO PERSONNEL.
CAUTION
Take care when you install the pitot static probe covers. The gap of 0.39 inch (10
millimeter) is necessary to prevent water ingress. Water ingress can cause damage
the pitot static probes.
CAUTION
Take care when you install the vapor cooling system covers and the ECS outlet
cover. The vapor cooling system and ECS outlet louver vanes can be easily
damaged.
CAUTION
Do not park the aircraft in direct sunlight during very hot weather conditions. If the
aircraft is parked in these conditions, use the windshield covers to give protection
to the aircraft. This will help prevent damage to equipment.
Do this if the aircraft:
Has to stay outdoors for a long period
Has to stay outdoors at night
Is exposed to strong wind or snow.
2 Recommended Support Equipment
All the covers and equipment for parking are contained in the ground equipment compartment.
Section 1 - Ground Handling
Ground Servicing Guide Report No: 02484
Issue date: May 13, 2020
Page 1-2-1
PC24-A-A15-10-0002-00A-170A-A

Table of Contents

Related product manuals