Pilot Communications PBAT-61 User Manual

Pilot Communications PBAT-61

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

PBAT-61 Cell Sensor

Installation & Operation Manual

V1.0

PILOT (HENGQIN) CO., LTD.

珠海横琴派诺技术有限公司

Table of Contents

Questions and Answers:

S
Stephen KleinAug 5, 2025
What to do if Pilot Communications PBAT-61 master device can't communicate with the sensor?
- M
  Michael WrightAug 5, 2025
  If the master device from Pilot Communications Accessories isn't communicating with the sensor, here are a few things to check: * **Unit ID:** Ensure the sensor's Unit ID matches the master's. * **Baud Rate:** Verify that the baud rates on both devices are the same. * **Communication Line:** See if the communication line bus is excessively long. * **Communication Cable:** Check for any disconnections in the communication cable.
Q
qthompsonAug 17, 2025
Why is the running LED not on after powering on Pilot Communications Accessories?
- T
  tdavisAug 17, 2025
  If the running LED on your Pilot Communications Accessories isn't on after powering it on, the issue might be that the device isn't receiving power. To resolve this, check if the correct power is being supplied to the V+ Bat and V- Bat terminals.

Pilot Communications PBAT-61 Specifications

General

Brand	Pilot Communications
Model	PBAT-61
Category	Accessories
Language	English

Related product manuals