PILOTAGE NANO-X - Safety Check Before Flying; Pre-Flight Inspection

5
• Be cautious of your actions and careful to keep your body and loose clothing away from the blades. Never
take your eyes o the model or leave it unattended while it is turned on. Stop operation immediately if the
model ies out of your view. Once landed, immediately turn o the model and transmitter.
AVOID FLYING ALONE
• Beginners should avoid ying alone whilst learning ight skills. It is advised that an experienced pilot be in
nearby guidance.
SAFETY CHECK BEFORE FLYING
CAREFULLY INSPECT THE X4 BEFORE EVERY FLIGHT
• Before operation, please check the batteries of the transmitter and receiver are charged enough for the
ight.
• Before turning on the transmitter, please check that the throttle stick is in the full down position.
• Carefully check rotor blades and rotor holders. Broken or premature failure of parts will result in a dangerous
situation.
• Check the battery and power plug are securely fastened. Vibration and violent ight may lead the plug to
loose and result in loss of control.
• When turning on the unit, please follow the power on/o procedure: for Power ON- please turn on the
transmitter rst, and then turn on the receiver. For Power OFF- please turn o the receiver rst and then turn
o the transmitter. Improper procedure may cause loss of control of the quadcopter.