Operation
Operating Manual PNOZ m ES EtherNet/IP
1003387-EN-05
21
LED Meaning
NS No supply voltage present or no IP address assigned
green The fieldbus module PNOZ m ES EtherNet/IP has established at least
one connection
green The fieldbus module PNOZ m ES EtherNet/IP has no IP connection
red The connection to the master was interrupted.
Remedy: Reconnect.
red IP address is already in use.
green/red Self test after switching on the supply voltage
7.2 Web server
A web server is implemented in the fieldbus module PNOZ m ES EtherNet/IP. This can be
used to poll data from the PNOZmulti 2.
} The web server is started once the PNOZ m ES EtherNet/IP is connected to the supply
voltage.
} The web server is intended for use with Internet Explorer or Firefox.
} Make sure that Javascript and Cookies are enabled in your browser's security settings.
7.2.1 Password administration
} Two users are preset for access to the web server when the product is delivered.
User Access type Password
User Read-only 1111
User Read/write 0000
} A password is required for access.
} The user names and passwords can be changed.
} If you change the password and then forget the new password, you will no longer be
able to access the fieldbus module PNOZ m ES EtherNet/IP via the web server. In this
case you will need to return the module to Pilz for it to be reset to its original delivery
status. All the settings will be lost in the process.
So if you have changed the password, make sure that you store the (new) password
securely.
} Before changing the passwords, make sure that the configuration is saved along with
the passwords from the delivery status.
To Next Page
Loading...