Need help?Do you have a question about the Pilz PNOZ m ES EtherNet/IP and is the answer not in the manual?
General| Communication Protocol | EtherNet/IP |
|---|---|
| Input Voltage | 24 V DC |
| Supply voltage | 24 V DC |
| Operating Temperature | -20°C to +60°C |
| Width | 45 mm |
| Protection type | IP20 |
| Operating Temperature Range | 0 - 60 °C |
| Protection Class | IP20 |
| Category | Safety Relay |
Defines the product's intended application as an expansion module for PNOZmulti 2 and its communication role.
Covers qualifications for personnel, warranty, liability, and disposal of electronic devices.
Details the data transfer mechanisms, assembly instances, and data lengths for EtherNet/IP communication.
Provides a detailed explanation of the status indicated by the various LEDs on the PNOZ m ES EtherNet/IP module.
Covers essential wiring practices, cable requirements, and interference protection for EtherNet/IP connections.
Explains how to correctly connect the 24 VDC supply voltage and protect it with a circuit breaker.
Provides methods for configuring the module's IP address, including DIP switches and DHCP.
Introduces the integrated web server for polling data from the PNOZmulti 2 system.
Details supply voltage, tolerance, current consumption, and power dissipation for the module.
Specifies the EtherNet/IP interface, device type, transmission rates, and connection type.
To Next Page