PSEN cs3.1a/b
Operating Manual PSEN cs3.1a/b
1003295-EN-08
| 9
Unit features
} Transponder technology for presence detection
} Pilz coding type: Coded
} Dual-channel operation
} 2 safety inputs for series connection of multiple safety switches
} 2 safety outputs
} Safety Device Diagnostics (SDD)
– Safety Device Diagnostics can be used to poll sensor information, to perform actions
and to read configuration parameters
– Manipulation protection in accordance with ISO 14119 is possible by verifying the
short name of the actuator through the controller via SDD communication
} Diagnostic input for Y1 for Safety Device Diagnostics (SDD)
} Signal output/diagnostic output Y32 for Safety Device Diagnostics
} LED display for:
– State of the actuator
– State of the inputs
– Supply voltage/fault
} 1 direction of actuation
} Connection types:
– PSEN cs3.1a: Cable, 5 m
– PSEN cs3.1b: Cable, 10 m
To Next Page
Loading...
