Need help?Do you have a question about the Pilz PSEN sc B 5.5 and is the answer not in the manual?
General| Operating voltage | 24 V DC |
|---|---|
| Scanning range | 5.5 m |
| Safety integrity level | SIL 3 |
| Performance level | PL e |
| Connection | M12 connector |
| Protection rating | IP65 |
| Detection capability | 14 mm |
| Outputs | 2 OSSD outputs |
| Ambient temperature | +50 °C |
Defines the proper applications and purposes for the PSEN sc B 5 Series safety laser scanner.
Outlines safety requirements, including assessment, qualified personnel, warranty, and disposal.
Explains how to maintain the required safety distance in horizontal applications according to standards.
Provides methods to protect areas not covered by the scanner, like preventing stepping or creeping.
Introduces the PSENscan Configurator software as a tool for configuration and monitoring.
Covers system requirements and the step-by-step process for installing the PSENscan Configurator software.
Details the procedure for downloading configurations from the software to the safety laser scanner.
Guides on configuring zone sets, warning zones, and inputs for various operating scenarios.
Outlines the procedures for performing final safety checks and inspections after installation.
To Next Page
